iPad Pro, iPad Air, iPad mini and all standard iPad models — screen replacements, batteries, charging ports, back glass, Apple Pencil and more. Walk in, no appointment needed.
Cracked glass, dead pixels, backlight failure, touch not responding. iPad screens are large and expensive to replace if done wrong — we use quality parts and take the time to do it right.
Drains fast, won't hold a charge, shuts off unexpectedly, swollen battery. iPad batteries are larger than phone batteries but degrade the same way — a replacement brings your iPad back to full performance.
Won't charge, loose connection, only charges at a certain angle. Lightning and USB-C ports take daily abuse — we replace them properly so your iPad charges reliably again.
Cracked rear glass or housing on iPad Pro and iPad Air models. Back damage leaves your iPad unprotected — we assess frame damage alongside glass and replace at the component level.
Cracked or damaged aluminum housing on iPad Pro and iPad Air. Frame and chassis damage assessed alongside any display work — we'll tell you upfront if the housing needs attention before we close it back up.
Blurry photos, cracked camera lens, camera not opening, black viewfinder. iPad cameras are used heavily for video calls and document scanning — we diagnose before replacing anything.
Don't turn it on — bring it in immediately. iPads aren't waterproof and liquid damage spreads fast. We clean the board at the component level before anything corrodes further.
Won't turn on, No Service, won't charge even with a new port. We do the board-level iPad repair work most shops won't attempt — component-level diagnosis before touching anything.
A cracked iPad screen is the repair we see most. The large display means more surface area to damage — and with iPad Pro's OLED panel, the quality of parts and installation matters more than people expect. We take the time to do it right every time.
iPad batteries are large but they degrade over time — draining faster, shutting off unexpectedly, or swelling under the back panel. A replacement is one of the best value repairs you can do. Charging port issues often run deeper than they look — we diagnose first.
iPads get wet — dropped in water, spilled on, caught in the rain. Most iPads have no meaningful water resistance. The worst thing you can do is turn it on or put it in rice. Both cause more damage. Bring it in as soon as possible so we can clean the board at the component level before corrosion spreads.

Every iPad Pro from the original 9.7" through the latest M5 models. OLED on current gen, LCD on older models.

iPad Air 1 through the latest M4 models in 11" and 13". USB-C on Air 4 and later, Lightning on older models.

iPad mini 1 through the latest 7th gen. USB-C on mini 6 and later. The compact iPad that still takes the same damage.

The standard iPad line from 1st gen through 11th gen. Lightning on older models, USB-C from 10th gen onward.
Don't see your model? Bring it in — if it's an iPad, we've probably worked on it.
iPads are sealed differently than phones. Screens and batteries are held with strong adhesive — not just screws. After we open the device and complete the repair, everything needs time to re-seal properly before it goes back in your hands.
If you drop it off early in the day, we can often have it done the same day. If you bring it in later, overnight is more realistic and gives the adhesive time to cure fully. We'll always give you an honest timeline before we start.
Walk in or start a repair online.